Arm[:Immediate]; Arm:source; Arm:source <Arm_Source - VXI VT1422A User Manual

Subsystem Syntax

ARM[:IMMediate]

Comments
Usage

ARM:SOURce

Parameters
Comments
Chapter 7
ARM
[:IMMediate]
:SOURce BUS | EXTernal | HOLD | IMMediate | SCP | TTLTrg<n>
:SOURce?

ARM[:IMMediate]

arms the trigger system when the module is set to the ARM:SOUR
BUS or ARM:SOUR HOLD mode.
•
Related Commands: ARM:SOURCE, TRIG:SOUR
•
*RST Condition: ARM:SOUR IMM
•
Send with VXIplug&play Function: hpe1422_cmd(...)
ARM:IMM
ARM
ARM:SOURce <arm_source>
specified source.
Parameter Parameter
Name Type
arm_source discrete (string)
•
The following table explains the possible choices.
BUS
EXTernal
HOLD
IMMediate
SCP
TTLTrg<n>
•
See note about ARM subsystem on page 256.
•
When TRIG:SOURCE is TIMER, an ARM event is required only to trigger the
first scan. After that the timer continues to run and the module goes to the
Waiting-For-Trigger State ready for the next Timer trigger. An ABORT
command will return the module to the Trigger Idle State after the current scan
is completed. See TRIG:SOURce for more detail.
After INIT, system is ready for trigger event
Same as above (:IMM is optional)
configures the ARM system to respond to the
Range of
BUS | EXT | HOLD | IMM | SCP
| TTLTrg<n>
ARM[:IMMediate]
"TRG" signal on terminal module
ARM[:IMMediate]
The arm signal is always true (continuous arming).
SCP Trigger Bus (future SCP Breadboard)
The VXIbus TTLTRG lines (n=0 through 7)
VT1422A Command Reference
Default
Values
ARM
Units
none
257