This provides iSCSI and FC-attached servers access to block storage through an FC and Ethernet/IP network simultaneously. The MPX200 supports multiple functions including iSCSI, FCoE (10 GbE models), FCIP, and online or offline block-based data migration. FCIP and data migration are license-enabled features (see Product models).
Copper FC cables (direct-connect only) Cat5e or Cat6 GbE Ethernet network cables Purpose of the update The MPX200 firmware version for this release is 3.3.0.3. This release includes the following updates: Fixes for the iSCSI and data migration functions. See “Fixes”...
FCoE/iSCSI Controller may cause Command View to lose communication with the array. To resolve this problem, use the MPX200 CLI to present LUN 0 from each EVA Fibre Channel target WWN to each of the MPX200 FCoE/iSCSI ports, and to each of the management server's FCoE/iSCSI CNA ports.
Page 6
Router Data Migration Solution Guide. This document is available at: http://hp.com/go/mpx200. mpx Manager for Data Migration Services The HP mpx Manager for Data Migration Services GUI application is used to manage the MPX200 Data Migration Services. The HP mpx Manager for Data Migration Services for Windows, Linux, and Apple OS X is available at: http://hp.com/go/mpx200...
Be sure to back up the registry before making any changes. If you use a method other than the HP MPX200 Multifunction Router Windows software kit to update, you add the Tcp1323Opts and Disk TimeOutValue to the registry.