Show Routes - HP Surestore 64 - Director Switch User Manual

Show Routes

The Show Routes option allows you to view the path that Fibre Channel frames will take
between two end devices in a multiswitch fabric.
In order to view the route between two devices, the following must be true:
•
All switches or directors in the route must be managed by EFC Manager and attached
to the same EFC Server.
•
All switches or directors in the route must be FC-64 or compatible switches and be
running firmware version 1.3 or higher.
•
All switches or directors in the route must be in the same zone.
To view the route between two end devices, use the following procedure:
1. Open the Fabric View by selecting Fabric View from the EFC Manager View menu.
2. Open the Fabric Manager by clicking the pentagonal icon for the appropriate fabric.
3. Choose Show Route from the Fabric Manager Configure menu. The Show Route dialog
box displays.
Switches and directors that support route reporting and that are managed by this EFC
Server display in the left column of the dialog box.
Show Routes 135