Disabling Compression; Encryption And Compression Example - HP SN3000B Administrator's Manual

Disabling compression

To disable compression on a port, follow these steps:
1. Connect to the switch and log in using an account with admin permissions, or an account with
2. Disable the port on which you want to disable compression. Use the portDisable
3. Enable the port with the portEnable command.
After enabling the port, the new configuration becomes active.

Encryption and compression example

The following example shows configuring and enabling encryption and compression.In this case,
encryption and compression are applied to the E_Ports at either end of and ISL connecting a port
on a blade in an enterprise class platform named myDCX to a port on a Brocade 6510 switch
named myswitch.
and port number.
TABLE 59
Name
WWN
port ID
The example includes the following steps:
•
•
•
•
•
Fabric OS Administrator's Guide
53-1002446-01
OM permissions for the SwitchPortConfiguration RBAC class of commands.
command.Enter the portCfgCompress
This example disables compression on port 21 on a Brocade 6510 switch:
portcfgcompress --disable 21
This example disables compression on port 15 of an FC16-32 blade in slot 9 of an enterprise
class platform:
portcfgcompress --disable 9/15
Table 59 identifies each end of the ISL connection by device name, device WWN,
Example ISL connections
Enterprise class platform
myDCX
10:00:00:05:1e:e5:cb:00
port index: 246
slot number: 12
port number: 22
Setting up authentication to permit key generation
Enabling encryption
Enabling compression
Disabling encryption
Disabling compression
Encryption and compression example
disable command.
--
Brocade 6510
myswitch
10:00:00:05:33:13:71:3e
port number: 0
14
317