Connected Switches; Finding The Switch Firmware Version; Obtain And Decompress Firmware - HP SN3000B Administrator's Manual

Connected switches

Before you upgrade the firmware on your switch, you need to check the connected switches to
ensure compatibility and that any older versions are supported. Refer to the Fabric OS Compatibility
section of the Brocade Fabric OS Release Notes, for the recommended firmware version.
NOTE
Go to
Support tab, then select Policies and Locations. Under Important Note, click on End of Life Support.
End-of-life products are not supported.
If fixed-port switches are adjacent and you start firmware downloads on them at the same time,
there may be traffic disruption.
To determine if you need to upgrade switches connected to the switch you are upgrading, use the
following procedure on each connected switch to display firmware information and build dates

Finding the switch firmware version

1. Connect to the switch and log in using an account with admin permissions.
2. Enter the version command.

Obtain and decompress firmware

Firmware upgrades are available for customers with support service contracts and for partners on
the Brocade website at http://www.brocade.com.
At the Brocade website click Brocade Connect, log in, and follow the instructions to register and
download firmware. Partners with authorized accounts can use the Brocade Partner Network.
You must decompress the firmware before you can use the firmwareDownload command to update
the firmware on your equipment. Use the UNIX tar command for .tar files, the gunzip command for
all .gz files, or a Windows unzip program for all .zip files
When you unpack the downloaded firmware, it expands into a directory that is named according to
the version of Fabric OS it contains. For example, when you download and unzip v7.0.0.zip, it
expands into a directory called v7.0.0. When you issue the firmwareDownload command, there is
an automatic search for the correct package file type associated with the switch. Specify only the
path up to and including the v7.0.0 directory.
Fabric OS Administrator's Guide
53-1002446-01
http://www.brocade.com
The following information is displayed:
•
Kernel displays the version of switch kernel operating system.
•
Fabric OS displays the version of switch Fabric OS.
•
Made on displays the build date of firmware running in switch.
•
Flash displays the install date of firmware stored in nonvolatile memory.
•
BootProm displays the version of the firmware stored in the boot PROM.
Preparing for a firmware download
to view end-of-life policies for Brocade products. Navigate to the
9
195