Releasing A Port From A Pod Set - HP SN3000B Administrator's Manual

18
Ports on Demand
1. Connect to the switch and log in using an account with admin permissions.
2. Enter the licensePort
3. Take the following appropriate action based on whether port reservations are available:

Releasing a port from a POD set

Releasing a port removes it from the POD set; the port appears as unassigned until it comes back
online. Persistently disabling the port ensures that the port cannot come back online and be
automatically assigned to a POD assignment. Before you can re-assign a license, you must disable
the port and release the license.
After a port is assigned to the POD set, the port is licensed until it is manually removed from the
POD port set. When a port is released from its POD port set (Base, Single, or Double), it creates a
vacancy in that port set.
1. Connect to the switch and log in using an account with admin permissions.
2. Enter the switchDisable command to take the switch offline.
3. Enter the switchShow command to verify the switch state is offline.
4. Enter the licensePort
5. Enter the licensePort
390
show command to verify there are port reservations available.
--
switch:admin> licenseport --show
24 ports are available in this switch
Full POD license is installed
Dynamic POD method is in use
24 port assignments are provisioned for use in this switch:
12 port assignments are provisioned by the base switch license
12 port assignments are provisioned by a full POD license
10 ports are assigned to installed licenses:
10 ports are assigned to the base switch license
0 ports are assigned to the full POD license
Ports assigned to the base switch license:
1*, 2*, 3*, 4*, 5*, 6*, 8*, 21, 22, 23
Ports assigned to the full POD license:
None
Ports not assigned to a license:
0, 7, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20
•
If a port reservation is available, then issue the licensePort
reserve a license for the port.
switch:admin> licenseport -reserve 0
•
If all port reservations are assigned, select a port to release its POD license. Follow the
instructions in "Releasing a port from a POD set"
assignment. Once the port is released, you can reserve it.
switch:admin> switchdisable
release command to remove the port from the POD license.
--
switch:admin> licenseport --release 0
show command to verify the port is no longer assigned to a POD set.
--
switch:admin> licenseport --show
24 ports are available in this switch
Full POD license is installed
Dynamic POD method is in use
24 port assignments are provisioned for use in this switch:
reserve command to
--
to release a port from its POD
Fabric OS Administrator's Guide
53-1002446-01