Adding Frame Monitors To A Port; Removing Frame Monitors From A Port; Saving Frame Monitor Configuration - HP SN3000B Administrator's Manual
Brocade fabric os administrator's guide - supporting fabric os v7.0.1 (53-1002446-01, march 2012)
Hide thumbs
Also See for SN3000B:
- Troubleshooting manual (138 pages) ,
- Reference manual (70 pages) ,
- Quickspecs (21 pages)
Table of Contents
Advertisement
20
Frame monitoring
Adding frame monitors to a port
If the switch does not have enough resources to add a frame monitor to a port, then other frame
monitors on that port might have to be deleted to free resources.
1. Connect to the switch and log in using an account with admin permissions.
2. Enter the fmMonitor
Example
This example adds a standard SCSI frame type monitor to ports 3 through 12.
Removing frame monitors from a port
1. Connect to the switch and log in using an account with admin permissions.
2. Enter the fmMonitor
Example
The following example removes the user-defined frame monitor, MyFrameMonitor, from all ports.
Saving frame monitor configuration
When you assign or remove frame monitors on ports, the list of ports to be monitored is
automatically saved persistently, unless you specified the
1. Connect to the switch and log in using an account with admin permissions.
2. Enter the fmmonitor
Example
In this example, the first command adds a standard SCSI frame type monitor to ports 3 through 12,
but does not save the port configuration. The second command saves the port configuration
persistently.
408
addmonitor command to add a frame monitor to one or more ports.
--
The set of ports to be monitored is automatically saved to the persistent configuration unless
you specify the -nosave option on this command.
switch:admin> fmmonitor --addmonitor SCSI -port 3-12
delmonitor command to remove a specific monitor from one or more
--
ports.
The set of ports to be unmonitored is automatically saved to the persistent configuration
unless you specify the -nosave option on this command.
switch:admin> fmmonitor --delmonitor MyFrameMonitor
save command to save the set of ports on which the frame type is
--
monitored to the persistent configuration.
switch:admin> fmmonitor --addmonitor SCSI -port 3-12 -nosave
switch:admin> fmmonitor --save SCSI
nosave option.
-
Fabric OS Administrator's Guide
53-1002446-01
Advertisement
Table of Contents
