Configuring An Fa-Pwwn For An Hba Connected To An Edge Switch - HP SN3000B Administrator's Manual
Brocade fabric os administrator's guide - supporting fabric os v7.0.1 (53-1002446-01, march 2012)
Hide thumbs
Also See for SN3000B:
- Troubleshooting manual (138 pages) ,
- Reference manual (70 pages) ,
- Quickspecs (21 pages)
Table of Contents
Advertisement
16
Configuring FA-PWWNs
4. Enable the FA-PWWN on the HBA. The following steps are to be executed on the server and not
Once the Brocade HBA has been assigned the FA-PWWN, the HBA retains the FA-PWWN until
rebooted. This means you cannot unplug and plug the cable into a different port on the AG. You
must reboot the HBA before moving the HBA to a different port. If you move an HBA to a different
port on a switch running Fabric OS v7.0.0 or later, the HBA will disable its port. If the HBA moves to
a different port on a switch running a version of Fabric OS earlier than 7.0.0, the HBA will continue
to disable its port.
Configuring an FA-PWWN for an HBA connected to an edge switch
For this procedure, some of the steps are to be executed on the switch and some are to be
executed on the server.
1. Log in to the edge switch to which the device is connected.
2. Assign the FA-PWWN.
3. Enter the following command:
332
10:00:00:05:1e:d7:3d:dc/9
10:00:00:05:1e:d7:3d:dc/16
------------------------------------------------------------
Virtual Port WWN
------------------------------------------------------------
52:00:10:00:00:0f:50:30
11:22:33:44:55:66:77:88
52:00:10:00:00:0f:50:32
2:00:10:00:00:0f:50:33
52:00:10:00:00:0f:50:38
the switch.
a. Log in to the server as root.
b. Enter the following command:
bcu port -faa port_id --enable
c.
Enter the following command:
bcu port -faa port_id --query
•
If you are manually assigning a WWN, enter the following command:
fapwwn --assign -port [slot/]port -v Virtual_PWWN
•
If you want the WWN to be automatically assigned, enter the following command:
fapwwn --assign -port [slot/]port
fapwwn --show -port all
You should see output similar to the following sample.
-----------------------------------------------------------------------
Port
PPWWN
-----------------------------------------------------------------------
0 --:--:--:--:--:--:--:-- 52:00:10:00:00:0f:50:30 10101 Yes
1 --:--:--:--:--:--:--:-- 11:22:33:44:33:22:11:22
10 --:--:--:--:--:--:--:-- 52:00:10:00:00:0f:50:45
20
20:09:00:05:1e:d7:2b:73
--
--:--:--:--:--:--:--:-- \
PID
Enable MapType
--
Yes
AG/Auto
11403
Yes
AG/User
11404
Yes
AG/Auto
--
Yes
AG/Auto
VPWWN
52:00:10:00:00:0f:50:44
\
PID Enable MapType
Port/Auto
--
Yes
Port/User
--
Yes
Port/Auto
Fabric OS Administrator's Guide
53-1002446-01
Advertisement
Table of Contents
