HP SN3000B Administrator's Manual page 553

7.
Fabric OS Administrator's Guide
53-1002446-01
Permanent Port Name: 10:00:00:00:00:03:00:00
Port Index: na
Share Area: No
Device Shared in Other AD: No
All of the devices from both LSANs should appear in the output. If the devices do not appear in
the output, issue the cfgShow command to verify your zone configuration. Use the cfgActvShow
command to display the zone configuration currently in effect.
The following example illustrates the use of cfgActvShow.
switch:admin> cfgactvshow
Effective configuration:
cfg:test
zone:lsan_san
10:00:00:00:00:03:00:00
10:00:00:00:00:01:00:00
zone:lsan_test
50:06:01:60:38:e0:0b:a4
10:00:00:00:c9:44:54:04
Log into the FC router and run the lsanZoneShow -s command to verify that the designated
FIDs and devices are shared among LSANs.
Fabric configurations for interconnectivity
A
515