Disabling Encryption; Disabling Compression - HP StoreFabric SN6500B Administrator's Manual

4. Enable the port with the portEnable command.
After enabling the port, the new configuration becomes active.

Disabling encryption

To disable encryption on a port, follow these steps:
1. Connect to the switch and log in using an account with secure admin permissions, or an
2. Use the portDisable command to disable the port on which you want to disable encryption
3. Enter the portCfgEncrypt
4. Enable the port with the portEnable command.
After enabling the port, the new configuration becomes active.

Disabling compression

To disable compression on a port, follow these steps:
1. Connect to the switch and log in using an account with admin permissions, or an account with
2. Use the portDisable command to disable the port on which you want to disable compression.
3. Enter the portCfgCompress
4. Enable the port with the portEnable command.
After enabling the port, the new configuration becomes active.
Fabric OS Administrator's Guide
53-1002745-02
account with OM permissions for the EncryptionConfiguration RBAC class of commands.
The following example disables encryption on port 21 on a Brocade 6510 switch:
switch:admin> portcfgencrypt --disable 21
The following example disables encryption on port 15 of an FC16-32 blade in slot 9 of an
enterprise class platform:
switch:admin> portcfgencrypt --disable 9/15
OM permissions for the SwitchPortConfiguration RBAC class of commands.
The following example disables compression on port 21 on a Brocade 6510 switch:
switch:admin> portcfgcompress --disable 21
The following example disables compression on port 15 of an FC16-32 blade in slot 9 of an
enterprise class platform:
switch:admin> portcfgcompress --disable 9/15
Configuring encryption and compression
disable command.
--
disable command.
--
14
405