HP SN3000B Administrator's Manual page 417

Brocade fabric os administrator's guide - supporting fabric os v7.0.1 (53-1002446-01, march 2012)
Hide thumbs Also See for SN3000B:
Table of Contents

Advertisement

1. Connect to the switch and log in using an account with admin permissions, or an account with
2. Use the licenseAdd command to add the 10G license.
3. Use the licenseShow command to verify the license.
4. Use the portCfgOctetSpeedCombo command to set the combination speed for the first port
5. Use the portCfgSpeed command to set the port speed on each port you want to operate at 10
Example of assigning a 10G license on an FC port blade and enabling 10 Gbps operation on a port
This example assigns a license to slot 4 on a DCX 8510-8 Backbone and enables 10 Gbps
operation on port 2 of the port blade in that slot. In this example, the 10G license was first
automatically assigned to slot 1.
Example of assigning a 10G license on a Brocade 6510 and enabling 10 Gbps operation on a port
This example assigns a license to the Brocade 6510 switch and enables 10 Gbps operation on port
2.
Fabric OS Administrator's Guide
53-1002446-01
OM permissions for the license and switchportconfiguration classes of RBAC commands.
Bladed platforms only: If the results of the automatic license assignment are not what you
intended, use the licenseSlotCfg command to reassign the license to the desired blades.
octet to a setting that supports 10 Gbps operations. Valid settings for 10 Gbps operations
include:
2—Autonegotiated or fixed port speeds of 10 Gbps, 8 Gbps, 4 Gbps, and 2 Gbps
3—Autonegotiated or fixed port speeds of 16 Gbps and 10 Gbps
Gbps.
8510-8switch:admin> licenseadd aTFPNFXGLmABANMGtT4LfSBJSDLWTYD3EFrr4WGAEMBA
8510-8switch:admin> licenseshow
aTFPNFXGLmABANMGtT4LfSBJSDLWTYD3EFrr4WGAEMBA
10 Gigabit FCIP/Fibre Channel (FTR_10G) license
Capacity 1
Consumed 1
Configured Blade Slots 1
8510-8switch:admin> licenseslotcfg -remove FTR_10G 1
8510-8switch:admin> licenseslotcfg -add FTR_10G 4
8510-8switch:admin> licenseshow
aTFPNFXGLmABANMGtT4LfSBJSDLWTYD3EFrr4WGAEMBA
10 Gigabit FCIP/Fibre Channel (FTR_10G) license
Capacity 1
Consumed 1
Configured Blade Slots 4
8510-8switch:admin> portcfgoctetspeedcombo 4/2 2
8510-8switch:admin> portcfgspeed 4/2 10
8510-8switch:admin>
6510-switch:admin> licenseadd aTFPNFXGLmABANMGtT4LfSBJSDLWTYD3EFrr4WGAEMBA
6510-switch:admin> licenseshow
aTFPNFXGLmABANMGtT4LfSBJSDLWTYD3EFrr4WGAEMBA
10 Gigabit FCIP/Fibre Channel (FTR_10G) license
Capacity 1
Consumed 1
6510-switch:admin> portcfgoctetspeedcombo 2
6510-switch:admin> portcfgspeed 2 10
6510-switch:admin>
18
10G licensing
379

Advertisement

Table of Contents
loading

This manual is also suitable for:

Fabric os v7.0.1

Table of Contents