Unblocking Telnet
1. Connect to the switch through a serial port or SSH and log in as admin.
2. Type in the ipfilter
3. To permanently delete the policy, type the ipfilter
Listener applications
Brocade switches block Linux subsystem listener applications that are not used to implement
supported features and capabilities.
either block or do not start.
TABLE 22
Listener application
chargen
echo
daytime
discard
ftp
rexec
rsh
rlogin
time
rstats
rusers
Ports and applications used by switches
If you are using the FC-FC Routing Service, be aware that the secModeEnable command is not
supported.
Table 23
Fabric OS Administrator's Guide
53-1002446-01
delete command.
--
Refer to
"Deleting a rule to an IP Filter policy"
filter rules.
ATTENTION
If you deleted the rule to permit Telnet, you will need to add a rule to permit Telnet.
Blocked listener applications
Brocade DCX and DCX 8510 Backbone families
Disabled
Disabled
Disabled
Disabled
Disabled
Block with packet filter
Block with packet filter
Block with packet filter
Block with packet filter
Disabled
Disabled
on page 130 lists the defaults for accessing hosts, devices, switches, and zones.
on page 159 for more information on deleting IP
save command.
--
Table 22
lists the listener applications that Brocade switches
Listener applications
Brocade switches
Disabled
Disabled
Disabled
Disabled
Disabled
Disabled
Disabled
Disabled
Disabled
Disabled
Disabled
6
129