Configuring And Enabling Authentication - HP SN3000B Administrator's Manual

14
Configuring encryption and compression

Configuring and enabling authentication

To configure authentication for ports that will later be configured for encryption, follow these steps:
1. Log in to the switch using an account with admin permissions, or an account with OM
2. Enter the secAuthSecret
314
22 No
23 No
144 No
145 No
146 No
147 No
148 No
149 No
150 No
151 No
-----------------------------------------------------
88 No
89 No
90 No
91 No
92 No
93 No
94 No
95 No
208 No
209 No
210 No
211 No
212 No
213 No
214 No
215 No
344 No
345 No
346 No
347 No
348 No
349 No
350 No
351 No
permissions for the Authentication RBAC class of commands.
ISL. It is recommended to use a 32 bit secret for an ISL carrying encrypted or compressed
traffic.
secauthsecret --set
When prompted, enter the WWN for the local switch and secret strings for the local switch and
the remote switch.
NOTE
When setting a secret key pair, you are entering the shared secrets in plain text. Use a secure
channel, such as SSH or the serial console, to connect to the switch on which you are setting
the secrets.
No No
No No
No No
No No
No No
No No
No No
No No
No No
No No
No No
No No
No No
No No
No No
No No
No No
No No
No No
No No
No No
No No
No No
No No
No No
No No
No No
No No
No No
No No
No Yes
No Yes
No No
No No
set command to establish pre-shared secrets at each end of the
--
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
Yes
Yes
No
No
Fabric OS Administrator's Guide
53-1002446-01