The Boot Prom Password; Setting The Boot Prom Password For A Switch With A Recovery String - HP SN3000B Administrator's Manual

The boot PROM password

The boot PROM password provides an additional layer of security by protecting the boot PROM from
unauthorized use. Setting a recovery string for the boot PROM password enables you to recover a
lost boot PROM password by contacting your switch service provider. Without the recovery string, a
lost boot PROM password cannot be recovered.
Although you can set the boot PROM password without also setting the recovery string, it is strongly
recommended that you set both the password and the recovery string. If your site procedures
dictate that you set the boot PROM password without the recovery string, see
PROM password for a switch without a recovery string"
To set the boot PROM password with or without a recovery string, refer to the section that applies to
your switch or Backbone model.
CAUTION
Setting the boot PROM password requires accessing the boot prompt, which stops traffic flow
through the switch until the switch is rebooted. Perform this procedure during a planned
downtime.

Setting the boot PROM password for a switch with a recovery string

This procedure applies to the following switch models: Brocade 300, 5410, 5424, 5450, 5460,
5470, 5480, 5100, 5300, 65,10, 7800, 8000, and 8510 switches. If your switch is not listed,
please contact your switch support provider for instructions.
1. Connect to the serial port interface as described in
2. Reboot the switch.
3. Press ESC within four seconds after the message "Press escape within 4 seconds..." displays.
4. Enter 2.
Fabric OS Administrator's Guide
53-1002446-01
port" on page 16.
The following options are available:
Option
1 Start system.
2 Recovery password.
3 Enter command shell.
•
If no password was previously set, the following message displays:
Recovery password is NOT set. Please set it now.
•
If a password was previously set, the following messages display:
Send the following string to Customer Support for password recovery:
afHTpyLsDo1Pz0Pk5GzhIw==
Enter the supplied recovery password.
Recovery Password:
The boot PROM password
on page 95.
"Connecting to Fabric OS through the serial
Description
Continues the system boot process.
Lets you set the recovery string and the boot PROM password.
Provides access to boot parameters.
5
"Setting the boot
93