Fabric os administrator's guide, 7.1.0 (53-1002745-02, march 2013) (666 pages)
Summary of Contents for HP SysMan
Page 1
Part Number: AA-xxxxx-TF November 2002 Operating System and Version: Tru64 UNIX, Version 5.1 and higher This document describes the installation procedure and the instructions for accessing the SysMan Menu from a HP iPAQ Pocket PC. Hewlett-Packard Company Palo Alto, California...
Page 2
Data for Commercial Items are licensed to the U.S. Government under vendor’s standard commercial license. None of Compaq, HP, or any of their subsidiaries shall be liable for technical or editorial errors or omissions contained herein. The information is provided “as is” without warranty of any kind and is subject to change without notice.
SysMan iPAQ software. 1.1 Minimal Requirements The following section states the minimal requirements for both the installation and use of the software to access the SysMan Menu from the iPAQ Pocket PC hand-held computer. These requirements are divided into these categories: •...
Microsoft Corporate Web Site, http://www.microsoft.com. 1.1.3 iPAQ Pocket PC Minimum Requirements The following requirements are necessary for the installation and use of the SysMan iPAQ software. • 32MB of RAM, with 256KB free for Storage and 256KB free for Programs.
1.2 Transferring SysMan iPAQ software The software that enables the iPAQ Pocket PC to access the Tru64 UNIX SysMan Menu is available over the Internet at the following URL: http://www.tru64unix.compaq.com/ipaq There are other useful files, including this document in PDF format, at this site also.
My Documents folder in the ActiveSync window. Alternatively, you can use the Cut and Paste commands. This step transfers the SysMan iPAQ software to the iPAQ Pocket PC. Verify the success of the transfer by using the iPAQ Pocket PC’s File Explorer to locate the sysmanipaq.cab file in the My Documents...
Verify the installation by tapping Start. The command SysMan will be in the Start menu. 1.4 Upgrading the Authentication Server You may need to upgrade the Authentication Server on a Tru64 UNIX system before you can access the SysMan Menu from the iPAQ Pocket PC. Installing the Software 1–5...
Select item 2, “List installed patches” from the Patch Tracking Menu. The Patch Tracking Selection Menu is displayed. Select item 3, “List All Files” from the Patch Tracking Selection Menu. Look for /usr/share/sysman/web/classLib/smauth.jar in the list of displayed files. If this file is listed, do not upgrade the Authentication Server.
Page 11
If you are running Tru64 UNIX V5.1: Use a browser to download the Authentication Server from the following web site: http://www.tru64unix.com- paq.com/ipaq. If you have transferred this file as part of an archive, extract the smauth.jar_v51 file from the archive and move it to the Tru64 UNIX system.
Initially, you will need to enter the name or Internet Protocol address (IP address) of the cluster or host system (the one on which you will invoke SysMan Menu) to a list of hosts that is stored on the iPAQ Pocket PC. From the Host List, tap the Add Hosts button.
Online help for the application is available from the application window by selecting the Help button. Online help for the SysMan Menu is obtained by selecting its Help button without any application selected. Online help uses Microsoft’s Pocket Internet Explorer to display the necessary text.
Page 15
Tap the Exit button on the SysMan Menu to exit it and return to the Host List. Accessing the SysMan Menu 2–3...
Need help?
Do you have a question about the SysMan and is the answer not in the manual?
Questions and answers