Managing Administrative Domains; In This Chapter; Administrative Domains Overview - HP SN3000B Administrator's Manual

Brocade fabric os administrator's guide - supporting fabric os v7.0.1 (53-1002446-01, march 2012)
Hide thumbs Also See for SN3000B:
Table of Contents

Advertisement

Managing Administrative Domains

In this chapter

Administrative Domains overview

An Administrative Domain (Admin Domain or AD) is a logical grouping of fabric elements that
defines which switches, ports, and devices you can view and modify. An Admin Domain is a filtered
administrative view of the fabric.
NOTE
If you do not implement Admin Domains, the feature has no impact on users and you can ignore this
chapter.
Admin Domains permit access to a configured set of users. Using Admin Domains, you can
partition the fabric into logical groups and allocate administration of these groups to different user
accounts. These accounts can manage only the Admin Domains assigned to them and cannot
make changes to the rest of the fabric.
For example, you can put all the devices in a particular department in the same Admin Domain for
ease of managing those devices. If you have remote sites, you could put the resources in the
remote site in an Admin Domain and assign the remote site administrator to manage those
resources.
Admin Domains and Virtual Fabrics are mutually exclusive and are not supported at the same time
on a switch.
Do not confuse Admin Domains with zones:
You can have up to 256 Admin Domains in a fabric (254 user-defined and 2 system-defined),
numbered from 0 through 255.
Admin Domains are designated by a name and a number. This document refers to specific Admin
Domains using the format "ADn" where n is a number between 0 and 255.
ATTENTION
The Admin Domain administrator can define up to 254 ADs (AD1 through AD254) in the AD
database; however, it is recommended that no more than 16 active Admin Domains run
concurrently. More than 16 active Admin Domains might cause performance degradation and
unpredictable system behavior.
Fabric OS Administrator's Guide
53-1002446-01
Administrative Domains overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 337
Admin Domain management for physical fabric administrators . . . . . . . . 346
SAN management with Admin Domains . . . . . . . . . . . . . . . . . . . . . . . . . . . 358
Zones define which devices and hosts can communicate with each other.
Admin Domains define which users can manage which devices, hosts, and switches.
Chapter
17
337

Advertisement

Table of Contents
loading

This manual is also suitable for:

Fabric os v7.0.1

Table of Contents