Removing A Licensed Feature - HP SN3000B Administrator's Manual

Brocade fabric os administrator's guide - supporting fabric os v7.0.1 (53-1002446-01, march 2012)
Hide thumbs Also See for SN3000B:
Table of Contents

Advertisement

18

Removing a licensed feature

For the Brocade Backbones, licenses are effective on both CP blades, but are valid only when the
CP blade is inserted into a Backbone that has an appropriate license ID stored in the WWN card. If
a CP is moved from one Backbone to another, the license works in the new Backbone only if the
WWN card is the same in the new Backbone. Otherwise, you must transfer licenses from the old
platform to the new platform by obtaining new licenses for the previously licensed features using
the new license ID.
For example, if you swap one CP blade at a time, or replace a single CP blade, then the existing CP
blade (the active CP blade) propagates the licenses to the new CP blade if the WWN card has been
moved to the new platform.
If you move a standby CP from one Backbone to another, then the active CP will propagate its
configuration (including license keys) onto that standby CP.
1. Connect to the switch and log in using an account with admin permissions.
2. Activate the license using the licenseAdd command.
3. Verify the license was added by entering the licenseShow command. The licensed features

Removing a licensed feature

1. Connect to the switch and log in using an account with admin permissions.
2. Enter the licenseShow command to display the active licenses.
384
currently installed on the switch are listed. If the feature is not listed, enter the licenseAdd
command again.
Some features may require additional configuration, or you may need to disable and re-enable
the switch to make them operational; see the feature documentation for details.
switch:admin> licenseshow
aAYtMJg7tmMZrTZ9JTWBC4SXWLJMY3QfBJYHG:
Fabric license
Remote Switch license
Remote Fabric license
Extended Fabric license
Entry Fabric license
Fabric Watch license
Performance Monitor license
Trunking license
4 Domain Fabric license
FICON_CUP license
High-Performance Extension over FCIP/FC license
Full Ports on Demand license - additional 16 port upgrade license
2 Domain Fabric license
Integrated Routing license
Storage Application Services license
FICON Tape license
FICON XRC license
Adaptive Networking license
Inter Chassis Link license
Enhanced Group Management license
8 Gig FC license
DataFort Compatibility license
Server Application Optimization license
Fabric OS Administrator's Guide
53-1002446-01

Advertisement

Table of Contents
loading

This manual is also suitable for:

Fabric os v7.0.1

Table of Contents