Activating The License Using Telnet - HP StorageWorks MSA 2/8 - SAN Switch User Manual

Activating the License Using Telnet

Activate licenses using the licenseadd command. To activate an Extended
Fabrics license using the CLI:
1. Open a telnet or serial connection to the switch.
2. Log into the switch as Admin. The default password is "password".
3. Contact the switch supplier for an Extended Fabrics license key.
4. Enter the following:
5. Verify that the license was added by entering the licenseshow command,
Extended Fabric Version 3.1.x/4.1.x User Guide
licenseadd "key"
where "key" is the license key exactly as provided by the switch supplier.
The license key is case-sensitive.
switch:admin> licenseadd "aAaaaaAaAaAaAaA"
adding license key "aAaaaaAaAaAaAaA"
done.
switch:admin>
as described in "Verifying Activated
Installing Extended Fabric
Licenses" on page 14.
17