Connecting The Usb Using The Included Usb Cord Clamps - Brother Entrepreneur Pro PR1000e Operation Manual

Users manual - english
Hide thumbs Also See for Entrepreneur Pro PR1000e:
Table of Contents

Advertisement

— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
2
Place the pattern that you wish to recall into
the "Removable Disk" folder.
After writing the data to the embroidery
machine, the key for that pattern appears
in the screen.
3
If the desired pattern can still not be written,
repeat steps
■ Disconnecting the USB cable
Before disconnecting the USB cable, click the
"Unplug or Eject Hardware" icon in the taskbar
of Windows 2000, the "Safely Remove
Hardware" icon in the taskbar of Windows XP/
Windows Vista or the "Safly Remove Hardware
and Eject Media" icon in the taskbar of
Windows 7. Then, when the removable disk can
safely be removed, disconnect the USB cable
from the computer and the machine.
In case of Windows 7
In case of Windows Vista
● Be sure to perform the operation described
above before disconnecting the USB cable
from the computer and embroidery
machine, otherwise the computer may
malfunction, the data may not be written
correctly, or the data or data writing area
on the embroidery machine may be
damaged.
● Do not unplug a USB device/media from
this machine immediately after it has been
plugged in. Be sure to wait at least 5
seconds before unplugging the USB
device/media.
1
2
and
.
Note
Connecting the USB
using the included USB
cord clamps
When connecting the embroidery machine to a
computer, use the included USB cord clamps to
keep the cord away from the carriage.
Included cord clamps
Installation positions of the USB cord clamps
1 Front screw hole on the side of the machine
2 Rear screw hole on the side of the machine
1
Using the included Allen screwdriver,
remove the protective cap covering the front
screw on the side of the machine.
• Insert the end of the Allen screwdriver into
the hole in the protective cap, and then
lightly pull out the protective cap to
remove it.
Selecting an Embroidery Pattern 171
1
2
5

Advertisement

Table of Contents

Troubleshooting

loading

This manual is also suitable for:

Entrepreneur pro pr-1000

Table of Contents