Brother Entrepreneur Pro PR1000e Operation Manual page 244

APPENDIX — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
8 When embroidering is finished, the
following screen appears. Touch
A screen appears so that a section of the
large-size embroidery pattern can be
selected.
9 Touch to select the next section of the
pattern, and then touch
0 Touch , and then
242
a Hoop the fabric for the next design section
aligning on the alignment stitching. In this
.
case, align the left side of the hoop on the
right side of the design section embroidered
in step
1 Alignment stitching
.
● Make sure that the alignment stitching is
b Repeat steps
combine the remaining sections of the
pattern.
.
6
.
Note
completely within the embroidery field.
Set the embroidery sheet inside the
embroidery frame and align the grid with
the alignment stitching for easier
placement.
7 0
to to embroider and