Connecting The Power Cord - Brother BAS-311H Basic Operation Manual

3. INSTALLATION

3-9. Connecting the power cord

Be sure to connect the ground. If the ground connection is not secure, you run a high risk of receiving a serious electric
shock, and problems with correct operation may also occur.
< Seen from underneath table >
14
Control box
Green and yellow wire (ground wire)
CAUTION
Leg
2353B
BAS-311H
Connect cords that match the voltage
specifications.
< EU specifications＞
(1) Filter box
(2) Screws [4 pcs]
(3) Staples [7 pcs]
(4) Power cord
1. Attach an appropriate plug to the
power cord (4). (The green and yellow
wire is the ground wire.)
2. Insert the power
properly-grounded electrical outlet.
NOTE:
• Take care when tapping in the staples
(3) to make sure that they do not pierce
the cords.
• Do not use extension cords, otherwise
machine operation problems
result.
plug into a
may