Changing The Display Guides - Brother Entrepreneur Pro PR1000e Operation Manual

BASIC SETTINGS AND HELP FEATURE — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
■ Page 5
J Link function
Set the Link function on or off. (Refer to
"Sending Embroidery Patterns From a Computer
to the Machine (Link Function)" on page 176)
K Manual Color Sequence
Set the Manual color sequence on or off. (Refer
to "Selecting/Managing Thread Colors for Each
Needle Bar (Manual Color Sequence)" on
page 132)
L Units of Measure
Enables the units of measurements that appear
in the screens to be changed. (Refer to
page 231.)
M LANGUAGES
Enables the display language to be changed.
The keys and messages appear in the selected
language. (Refer to page 231.)
N The Total Count counter shows the total
number of stitches sewn, and the Trip Count
counter show the number of stitches that have
been sewn since the machine's last
maintenance.
O The Total Time counter shows the total amount
of time that the machine has been used, and the
Trip Time counter shows the amount of time
that the machine has been used since its last
maintenance.
Use counters N and O as a standard for
performing periodic maintenance and for receiving
maintenance for the machine.
P The "No. ##" is the number for the embroidery
machine.
Q Version
Shows the version of the software installed on
this embroidery machine. (Refer to page 309.)
Note
● Check with your local authorized Brother
dealer or at "http://solutions.brother.com"
for details on available updates.
Details of each of the settings are described in the
following sections. After specifying the desired
settings, touch to return to the screen that
was displayed before the settings screen was
displayed.
220
● Some settings cannot be changed while
J
sewing.
K
L
Changing the display
M
guides
N
The guides in the pattern display area can be set for
O
the desired embroidery frame.
P
The guide settings can be specified from page 1/5
Q
of the settings screen.
1
1 How the guides will appear with the specified
settings can be previewed here.
2 Type of embroidery frame holder
Specifies the type of the embroidery frame
holder.
3 Area
Specifies the size of the embroidery frame
displayed as a guide.
The guides that appears does not indicates the
size of the embroidery frame that is actually
installed.
4 Centerpoint marker or grid lines
Display or the grid lines or hides the
centerpoint marker of the design.
■ Type of the embroidery frame holder
Select the type of the embroidery frame holder
according to the embroidery frame you want to
use.
Embroidery frame holder A/B (included)
Cap frame/Cylinder frame (Optional)
Embroidery frame holder C (Optional)
Refer to "Types of embroidery frames/frame
holders and their applications" on page 91 to
92.
Note
2
3
4