Computer (Usb) - Brother Entrepreneur Pro PR1000e Operation Manual

SELECTING/EDITING/SAVING PATTERNS — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
If the data is larger than 200 mm (H) × 360 mm
(W) (7-7/8 inches (H) × 14 inches (W)) even after it
is rotated 90 degrees, the following message
appears.
Touch to return to the pattern list screen.
Memo
● Perform the same operation when a
pattern larger than 200 mm(H) × 360
mm(W) (7-7/8 inches (H) × 14 inches (W))
is selected, whether from the computer or
USB media.

Computer (USB)

Using the included USB cable, the embroidery
machine can be connected to your computer, and
the embroidery patterns saved on the computer can
be temporarily recalled and used from the
machine.
Also, this machine is compatible with the Link
function. The Link function enables you to send
embroidery patterns edited on a computer to the
embroidery machine. (Refer to "Sending
Embroidery Patterns From a Computer to the
Machine (Link Function)" on page 176.)
Note
Check that the computer to be connected
meets the following operating conditions.
● Compatible models:
IBM-PC with a USB port as
standard equipment
IBM-PC-compatible computer
equipped with a USB port as
standard equipment
● Compatible operating systems:
Microsoft Windows 2000/XP,
Windows Vista, Windows 7
168
■ Connecting
You can arrange the USB cable using the included
USB clamp. (Refer to "Connecting the USB using the
included USB cord clamps" on page 171.)
1 Plug the USB cable connector into the
corresponding USB ports for the computer
and for the machine.
1 USB port for computer
2 USB cable connector
• The USB cable can be plugged into the
USB ports on the computer and
embroidery machine whether or not they
are turned on.
Note
● The connectors on the USB cable can only
be inserted into a connector in one
direction. If it is difficult to insert the
connector, do not insert it with force and
check the orientation of the connector.
● For details on the position of the USB port
on the computer, refer to the instruction
manual for the corresponding equipment.