Brother Entrepreneur Pro PR1000e Operation Manual page 146

EMBROIDERING SETTINGS — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
3 Touch for the multicolor steps to
become shaded and the selected pattern will
embroider in a single color, instead of
changing the thread while embroidering.
The thread color displayed on the screen
will be grayed out.
Memo
● If you touch any key of the needle bar
number above, the temporary needle bar
setting will be activated. (Refer to
page 142.)
• Touch again to return to the
pattern's original settings.
144
4 Touch .
Memo
● Even if uninterrupted embroidering has
been set, the DST thread trimming
function can be used (refer to page 225).
● You can select the needle bar on the
embroidering screen, even after touching
4
in step
● After finishing the embroidery,
uninterrupted embroidery will be
canceled.
.