Brother Entrepreneur Pro PR1000e Operation Manual page 302

APPENDIX — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
The automatic needle-threading
mechanism did not operate
correctly.
Remove the thread entangled in the
automatic needle-threading
mechanism, and then touch
.
The pattern could not be saved
because the memory is full.
Delete some patterns.
300
Another operation was performed
while the automatic needle-
threading mechanism was
threading the needle.
Press the automatic needle
threading button, and then perform
the other operation after the needle
is threaded. (Refer to page 60.)
The memory capacity of the USB
media has been exceeded.
There is too much data in either the
machine or the USB media.
Too many patterns are being
combined for the amount of
memory available.
Delete some patterns from the
combined pattern.
was touched in the
embroidering screen.
Touch to return to the
embroidering settings screen. The
previous embroidery in the
embroidering screen will be
canceled.