Brother Entrepreneur Pro PR1000e Operation Manual page 214

SELECTING/EDITING/SAVING PATTERNS — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
■ Deleting saved data
1 Touch .
The list of patterns appears.
2 Select the pattern to be deleted.
Touch the pattern.
3
1 Shows the amount of memory used by selected
pattern.
2 Shows the amount of free space in the
machine's memory.
3 Touch this key to delete the selected pattern.
• If the wrong pattern was selected or you
wish to select a different pattern, touch the
desired pattern.
212
3 Touch
4 To delete the data, touch
1
2
• To quit deleting, touch
5 If there is not enough space, delete another
pattern.
• Saving the data takes approximately 10
seconds.
● Do not turn off the machine while the
.
The screen shown below appears.
The pattern is deleted, and if there is
enough space, the previous screen
appears automatically.
If the embroidery data was saved
successfully, the previous screen
automatically appears.
Note
"Saving" message is displayed, otherwise
the pattern data being saved may be lost.
.
.