Disabling The Link Function - Brother Entrepreneur Pro PR1000e Operation Manual

SELECTING/EDITING/SAVING PATTERNS — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
b To open another pattern sent from the
computer, touch
procedure starting from step
embroidering.
To stop embroidering or to embroider the
same pattern again, touch
Note
● The embroidering screen settings specified
0
in step are saved even if
touched to continue sewing after
embroidering is finished.
Memo
● If the embroidery machine is turned off
while it is embroidering, the resume
operation can be used the next time it is
turned on.
180
, and then repeat the
8
to continue
.
was

Disabling the Link function

1 Touch , and then touch
to display page 5/5 of the settings
screen.
2 Touch to disable the Link function.
When the following message appears,
touch .
Turn off the machine.
3
and