Brother Entrepreneur Pro PR1000e Operation Manual page 221

— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
■ Page 3
C Reserved Needle
A specific thread color can be set to a needle
bar. The specified color remains assigned to the
needle bar specified here until the setting is
cancelled. You can also specify the maximum
sewing speed for a needle bar. This feature is
not accessible through the embroidering screen.
(Refer to "Reserved Needle Bar and Sewing
Speed Settings" on page 145.)
■ Page 4
C
C Screen Saver
Select the length of time until the screen saver
appears, and change the image of the screen
saver. (Refer to page 227.)
D Opening Screen
The machine can be set so that the opening
screen is either displayed ("ON") or not
displayed ("OFF") when the machine is turned
on.
E Spool Stand LED
Specifies the setting of spool stand LED
function. Spool stand LED informs when the
machine starts sewing, needs changing thread
and the error occurs, etc.(Refer to page 230.)
F Light
The brightness of the sewing light can be
adjusted. (Refer to page 20 or 229.)
G Speaker
The volume of operation sounds and alarm
sounds can be adjusted. (Refer to page 21 or
229.)
H Thread Sensor
Set "Thread Sensor" to either "ON" or "OFF".
(Refer to page 230.)
I Mouse Pointer
Change the shape of the pointer when a USB
mouse is used. (Refer to page 231.)
C
D
E
F
G
H
I
Using the Settings Key 219
6