Sending Embroidery Patterns From A Computer To The Machine (Link Function); Operations Available With The Link Function - Brother Entrepreneur Pro PR1000e Operation Manual

SELECTING/EDITING/SAVING PATTERNS — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
Sending Embroidery Patterns From a Computer to the
Machine (Link Function)
This machine is compatible with the Link function. This function allows embroidery patterns edited in
embroidery editing software provided with the Link function, such as PE-DESIGN NEXT or later, to be
transferred from a computer to multiple embroidery machines. As many as 100 embroidery patterns can be
transferred to an embroidery machine, and the embroidering status of the patterns being transferred can be
viewed from the computer monitor.
Use the included USB cable to connect the embroidery machine to a computer.

Operations available with the Link function

■ Send multiple embroidery patterns to connected embroidery machines
■ Check the sewing status of the embroidery machine (this model) from the computer
(Example of multiple machines connected)
176
Memo
● When connecting multiple embroidery
machines to the computer, use a
commercially available USB hub.
Please note that we recommend you to
use a self-powered USB hub. Do not use
USB extension cables or repeater cables.
For details on using the USB hub, refer to
its operating instructions.