Aligning The Embroidering Position; Using The Built-In Camera - Brother Entrepreneur Pro PR1000e Operation Manual

— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —

Aligning the Embroidering Position

Using the built-in camera

The camera built into this machine can be used to
easily align the embroidering position. This is
useful for patterns which need to be embroidered
in particular position as shown below.
1 Use a chalk pencil to draw a cross at the
desired embroidering location.
1 Chalk pencil mark
• Display the grid lines or cross grid lines in
the pattern display area to check the
pattern orientation. (Refer to "Centerpoint
marker and grid lines" on page 222.)
2 Hoop the fabric.
Note
● When hooping the fabric in the
embroidery frame, make sure that the
embroidery pattern will fit within the
embroidering area of the frame being
used.
1 Embroidering area
2 Embroidery pattern size
3 Chalk pencil mark
3 Select the pattern on your sewing machine.
4 Touch in the embroidering settings
screen.
5 Touch to set the starting point to the
center of the pattern.

Aligning the Embroidering Position 103

3