Brother Entrepreneur Pro PR1000e Operation Manual page 158

SELECTING/EDITING/SAVING PATTERNS — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
3 Select the characters.
Touch the tabs to select different character
shapes, and then touch the key for one letter
on each tab.
* Since the shapes of the letters are the same with
this design, there are no tabs to select. On this
screen, select three letters.
1 Tabs
2 To change the character font, touch
return to the design selection screen.
The selected characters appear in the
pattern display area.
156
1
2
1 If the wrong character was selected or you wish
1
to select a different character, touch
delete the last character selected, and then
touch the desired character.
Memo
● Depending on the design, there is a preset
2
number of letters; however, more than the
preset number of letters can be entered. If
too many letters are selected, touch
1
● If desired, multiple letters can be selected
to use these characters in the same way as
any other alphabet pattern without
creating a monogram.
2
to
1
to delete the letters.
to