Moving A Pattern - Brother Entrepreneur Pro PR1000e Operation Manual

— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —

Moving a pattern

Determine where in the embroidery frame the
pattern will be embroidered. If multiple patterns are
combined, move each pattern to lay out the design.
1 Touch the key for the direction where you
wish to move the pattern.
The pattern moves in the direction of the
arrow on the key.
1 Shows the vertical distance moved from center.
2 Shows the horizontal distance moved from
center.
● If you wish to group combined patterns,
refer to "Editing patterns as a group" on
page 204.
Memo
• To return the pattern to its position before it
was moved (center of the embroidery
frame), touch
The pattern can also be moved by dragging it.
If a USB mouse is connected, move the
mouse to position the pointer on the desired
pattern, and then hold in the left mouse
button while dragging the pattern. The
pattern can also be dragged by selecting it
directly in the screen with your finger or the
touch pen.
● The pattern can only be moved when the
arrow keys are on the screen.
1
2
● The pattern can also be moved by
touching the arrow keys in the screens that
appear when any of the other editing keys
are touched.
● The arrow keys in the embroidering
settings screen are used to move the frame
to select the embroidering position.
Editing the Embroidery Pattern (Pattern Editing Screen) 183
.
Note
Memo
5