Brother Entrepreneur Pro PR1000e Operation Manual page 106

OTHER BASIC PROCEDURES — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
6 Touch .
7 Touch .
8 Touch the positioning keys to move the
embroidery frame until the cross-shaped
chalk mark drawn on the fabric is displayed
in the camera view window.
1 Positioning keys
9 Touch to display the grid lines.
1 Grid lines
2 Chalk mark on the fabric
• Touch to check the embroidering
position.
104
● Touch
0 Touch
pattern until the grid lines are parallel with
the chalk mark drawn on the fabric. (Refer
to "Adjusting the angle" on page 100.)
1
1 Center point of the pattern
• Touch the positioning keys to move the
embroidery frame until the center point of
the pattern in the camera view window is
aligned with the chalk mark drawn on the
1
fabric.
2
a Touch
screen.
b Touch
c Touch
stop button to start embroidering.
Memo
to enlarge the camera view.
By enlarging the camera view, you can
make a close adjustment for the center
point of the pattern moving the
embroidery frame little by little.
and adjust the orientation of the
to return to the previous
.
, and then press the start/
1