Installing The Hot-Swap Power Supply - Lenovo System x3100 M4 Installation And Service Manual

Note: Make sure the top and the bottom of the power supply align with the upper and lower tabs on the
opening.
4. Install the screws that secure the power supply to the chassis.
5. Install the air duct.
If you have other devices to install, do so now. Otherwise, go to

Installing the hot-swap power supply

This procedure applies only to the 5U server model with hot-swap power supplies (Model name: 2582-F4x).
The following items describe the type of power supply that the server supports and other information that
you must consider when you install a power supply:
• To confirm that the server supports the power supply that you are installing, see
.
serverproven/
"Completing the installation" on page
http://www.lenovo.com/
.
Chapter 2 Installing optional devices
70.
67