Concluding Steps - Fujitsu PRIMERGY MX130 S2 Upgrade and maintenance manua Upgrade And Maintenance Manual

HDDs and accessible drives
Figure 34: Removing the HDD from 3.5-inch chassis bay
Ê Remove the four screws (see circles) and remove the HDD from the drive
bay.
7.6.4

Concluding steps

Perform the following procedures to complete the task:
Ê Close the front cage as described in section
page 53.
Ê Follow all procedures described in section
96 Upgrade and Maintenance Manual
"Closing the front cage" on
"Closing the server" on page 54.
MX130 S2