Concluding Steps - Fujitsu PRIMERGY MX130 S2 Upgrade and maintenance manua Upgrade And Maintenance Manual

Figure 115: Installing memory modules (B)
Ê Align the notch on the bottom of the module with the crossbar in the
connector.
Ê Press down on the memory module until the securing clips snap into the
cutouts at each end of the module.

10.2.4 Concluding steps

Perform the following procedures to complete the task:
Ê Follow all procedures described in section
Ê If available, update the system board BIOS to the latest version as described
in section "Updating the system board BIOS" on page
Ê If BitLocker functionality is used and has been disabled before starting the
maintenance task, re-enable BitLocker as described in section
BitLocker functionality" on page
MX130 S2
66.
Upgrade and Maintenance Manual
"Closing the server" on page
62.
Main memory
54.
"Enabling
183