Concluding Steps; Removing 3.5-Inch Hdd Out Of 5.25-Inch Odd/Hdd Bracket; Required Tools - Fujitsu PRIMERGY MX130 S2 Upgrade and maintenance manua Upgrade And Maintenance Manual

HDDs and accessible drives
Ê Connect cables to the HDD.
1 Power cable connector P2 (see
on page
2 SATA cable T26139-Y4028-V153
Ê Connect cables to the ODD.
3 Power cable connector P4 (see
on page
4 SATA cable T26139-Y4028-V201
7.9.4

Concluding steps

Perform the following procedures to complete the task:
Ê Close the front cage as described in section
page 53.
Ê Follow all procedures described in section
Ê Please observe the notes on RAID rebuild in section
array rebuild" on page
7.10 Removing 3.5-inch HDD out of 5.25-inch
ODD/HDD bracket

7.10.1 Required tools

Preliminary and concluding steps: tool-less
●
Installing a 3.5-inch HDD
●
– Phillips PH2 / (+) No. 2 screw driver
106
239)
239)
67.
Upgrade and Maintenance Manual
"Power cable T26139-Y4012-V211"
"Power cable T26139-Y4012-V211"
"Closing the front cage" on
"Closing the server" on page
"Performing a RAID
54.
MX130 S2