Concluding Steps - Fujitsu PRIMERGY MX130 S2 Upgrade and maintenance manua Upgrade And Maintenance Manual

Figure 72: Removing the backup drive
Ê Push the green handle backward (1) and pull the backup drive out of its
bay (2).
V
CAUTION!
Always replace dummy modules into unused drive bays to comply with
applicable EMC regulations and satisfy cooling requirements.

7.18.4 Concluding steps

Perform the following procedures to complete the task:
Ê Install the 5.25-inch dummy cover as described in section
inch dummy cover" on page
Ê Follow all procedures described in section
Ê If BitLocker functionality is used and has been disabled before starting the
maintenance task, re-enable BitLocker as described in section
BitLocker functionality" on page
MX130 S2
110.
66.
Upgrade and Maintenance Manual
HDDs and accessible drives
"Installing 5.25-
"Closing the server" on page 54.
"Enabling
135