7.3
Installing 3.5-inch HDD in HDD1 / HDD2
chassis bay
Upgrade and Repair Units (URU)
Average task duration: 5 minutes
7.3.1
Required tools
Preliminary and concluding steps: tool-less
●
Installing a 3.5-inch HDD: tool-less
●
7.3.2
Preliminary steps
Before installing a 3.5-inch HDD, perform the following steps:
Ê Follow all procedures described in section
Ê Open the front cage as described in section
page
52.
Ê Locate the correct drive bay as described in section
page
82.
MX130 S2
Upgrade and Maintenance Manual
HDDs and accessible drives
"Opening the server" on page
"Opening the front cage" on
"Mounting order" on
48.
83