Fujitsu PRIMERGY MX130 S2 Upgrade and maintenance manua Upgrade And Maintenance Manual page 220

System board and components
Figure 140: Installing the system board (B)
Ê Secure the system board with eight screws (M3 x 4.5 mm, standard C67
screw) (see circles) beginning with the two centering bolts (C).
I
Screw torque: 0.6 Nm (not applicable for the Japanese market)
Ê Verify the settings on the new system board (DIP switches, jumpers). For a
detailed description, please refer to section
220 Upgrade and Maintenance Manual
"Onboard settings" on page 250.
MX130 S2