Removing Slimline Odd Out Of 5.25-Inch Odd/Hdd Bracket; Required Tools; Preliminary Steps - Fujitsu PRIMERGY MX130 S2 Upgrade and maintenance manua Upgrade And Maintenance Manual

7.16 Removing slimline ODD out of 5.25-inch
ODD/HDD bracket

7.16.1 Required tools

Preliminary and concluding steps: tool-less
●
Removing a slimline ODD
●
– EMEA: Torx Plus Size 6
– Japan: Philips (+) No.00 screw driver

7.16.2 Preliminary steps

Before removing a slimline ODD, perform the following steps:
Ê Disable BitLocker functionality as described in section
functionality" on page
Ê Remove all backup and optical disk media from backup and optical disk
drives as described in section
page 60.
Ê Follow all procedures described in section
Ê Open the front cage as described in section
page 52.
Ê Locate the correct drive bay as described in section
page 82.
MX130 S2
59.
"Removing backup and optical disk media" on
Upgrade and Maintenance Manual
HDDs and accessible drives
"Disabling BitLocker
"Opening the server" on page
"Opening the front cage" on
"Mounting order" on
48.
125