Concluding Steps - Fujitsu PRIMERGY MX130 S2 Upgrade and maintenance manua Upgrade And Maintenance Manual

12.3.5 Concluding steps

Ê Reconnect all cables to the system board. For a complete cabling overview,
please refer to section
Ê Reinstall all remaining system board components as shown in the related
sections:
– Memory modules: refer to section
page 182
I
Install all memory modules into their original slots.
– Expansion cards: refer to section
page 161
I
Install all expansion cards into their original slots.
– TPM board (if applicable): refer to section
page 204
Ê Follow all procedures described in section
Ê Reconnect all external cables.
Ê If applicable, activate TPM functionality in the system BIOS under Advanced
> Trusted Computing. For more information, refer to the "Description - BIOS
Manual D3090 / D3091".
Ê If available, update the system board BIOS to the latest version as described
in section "Updating the system board BIOS" on page
Ê Inform the customer about changed MAC addresses. For further
information, refer to section
page 67.
Ê If BitLocker functionality is used and has been disabled before starting the
maintenance task, re-enable BitLocker as described in section
BitLocker functionality" on page
Ê Enter the required system information using the ChassisId_Prom Tool as
described in section
MX130 S2
"Cabling" on page
"Looking up changed MAC addresses" on
66.
"Using the Chassis ID Prom Tool" on page
Upgrade and Maintenance Manual
System board and components
235.
"Installing a memory module" on
"Installing expansion cards" on
"Installing the TPM board" on
"Closing the server" on page
62.
54.
"Enabling
68.
221