Applying Thermal Paste - Fujitsu PRIMERGY MX130 S2 Upgrade and maintenance manua Upgrade And Maintenance Manual

Processors

11.3.6 Applying thermal paste

I
For the Japanese market, follow the instructions provided separately.
I
If the processor upgrade or replacement kit contains a new CPU heat
sink, a thin layer of thermal compound has already been pre-applied to
its lower surface. This layer of thermal compound is protected by a
cover.In this case, please proceed with section
heat sink" on page
Figure 123: Thermal paste syringe
One thermal compound syringe (FSP:P304000003) contains thermal paste for
two processors.
In order to determine the correct amount of thermal paste (equal to 1.0 gram),
divide the grey area of the syringe up into two equal segments.
I
Add graduation marks to the syringe using a permanent marker to help
you apply the thermal paste.
196
197.
Upgrade and Maintenance Manual
"Installing the processor
MX130 S2