11
Processors
Safety notes
V
CAUTION!
Do not install unsupported processors. For further information on
●
supported processors, refer to section
page
188.
Circuit boards and soldered parts of internal options are exposed and
●
can be damaged by static electricity. Always discharge static build-up
(e.g. by touching a grounded object) before handling electrostatic-
sensitive devices (ESDs)
Do not touch the circuitry on boards or soldered parts. Hold circuit
●
boards by their metallic areas or edges.
When removing or installing the processor, be careful not to touch or
●
bend the processor pins.
For further information, please refer to chapter
●
information" on page
In this chapter
"Supported processors" on page 188
●
"Replacing the processor heat sink" on page 188
●
"Replacing the processor" on page 191
●
MX130 S2
31.
Upgrade and Maintenance Manual
"Basic procedure" on
"Important
187