Concluding Steps; Installing Additional 3.5-Inch Hdd In 3.5-Inch Chassis Bay; Required Tools; Preliminary Steps - Fujitsu PRIMERGY MX130 S2 Upgrade and maintenance manua Upgrade And Maintenance Manual

7.4.4

Concluding steps

Perform the following procedures to complete the task:
Ê Close the front cage as described in section
page 53.
Ê Follow all procedures described in section
7.5 Installing additional 3.5-inch HDD in 3.5-
inch chassis bay
Upgrade and Repair Units (URU)
Average task duration: 5 minutes
7.5.1

Required tools

Preliminary and concluding steps: tool-less
●
Installing a 3.5-inch HDD
●
– Phillips PH2 / (+) No. 2 screw driver
7.5.2

Preliminary steps

Before installing a 3.5-inch HDD, perform the following steps:
Ê Follow all procedures described in section
Ê Open the front cage as described in section
page 52.
Ê Locate the correct drive bay as described in section
page 82.
MX130 S2
Upgrade and Maintenance Manual
HDDs and accessible drives
"Closing the front cage" on
"Closing the server" on page
"Opening the server" on page
"Opening the front cage" on
"Mounting order" on
54.
48.
91