Fujitsu PRIMERGY MX130 S2 Upgrade and maintenance manua Upgrade And Maintenance Manual page 74

Power supply
Figure 18: Installing the standard PSU
Ê Insert the PSU into the chassis leaving a gap of about 3 cm to the rear
chassis wall (1) in
Ê Ensure that the mounting bracket on the chassis (see circle in
engages with the notch on the lower surface of the PSU.
Ê Slide the new PSU towards the rear of the chassis (2) in
74
figure 17.
Upgrade and Maintenance Manual
figure 18)
figure 17.
MX130 S2