Figure 156: Connecting the power cable
Ê Connect all power cable connectors to the installed drives (1).
It depends on your configuration which drives are installed. For details refer
to section
"HDDs and accessible drives" on page
Ê Connect the power cable connectors P5 and P6 to the installed HDDs (2).
For details refer to section
"Power cabling" on page
14.3.5 Concluding steps
Perform the following procedures to complete the task:
Ê Follow all procedures described in section
MX130 S2
"HDDs and accessible drives" on page 79
235.
Upgrade and Maintenance Manual
79.
"Closing the server" on page
Cables
and
54.
243