System Board And Components - Fujitsu PRIMERGY MX130 S2 Upgrade and maintenance manua Upgrade And Maintenance Manual

12

System board and components

This chapter provides information on how to replace the system board and
system board components as its CMOS battery and the Trusted Platform
Module (TPM).
Safety notes
V
CAUTION!
Devices and components inside the server remain hot after
●
shutdown. After shutting down the server, wait for hot components to
cool down before installing or removing internal options.
Circuit boards and soldered parts of internal options are exposed and
●
can be damaged by static electricity. Always discharge static build-up
(e.g. by touching a grounded object) before handling electrostatic-
sensitive devices (ESDs).
Do not touch the circuitry on boards or soldered parts. Hold circuit
●
boards by their metallic areas or edges.
For further information, please refer to chapter
●
information" on page
In this chapter
"Removing the CMOS battery" on page 201
●
"Installing the CMOS battery" on page 202
●
"Installing the TPM board" on page 204
●
"Removing the TPM board" on page 209
●
"Replacing the system board" on page 213
●
MX130 S2
31.
Upgrade and Maintenance Manual
"Important
199