Tools You Need At Hand - Fujitsu PRIMERGY MX130 S2 Upgrade and maintenance manua Upgrade And Maintenance Manual

2.3

Tools you need at hand

When preparing the maintenance task, ensure that all required tools are
available according to the overview below. You will find a list of required tools at
the beginning of each procedure.
Screw driver /
Bit insert
Phillips
PH2 / (+) No. 2
hexagonal cross
SW5 / PZ2
Phillips
PH2 / (+) No. 2
hexagonal cross
SW5 / PZ2
TPM bit insert
Dedicated TPM
screw driver /
TPM module
fixing tool (for the
Japanese market)
Phillips
PH1
Torx Plus Size 6
Philips (+) No.00
silver
For EMEA: Torx
For Japan: Philips
Front Fan Rivets
Pincer / Side
cutter
Table 2: List of required tools and used screws
MX130 S2
Screw
Upgrade and Maintenance Manual
Before you start
Usage Type
M3 x 4.5 mm
Board,
(silver)
Front USB
C26192-Y10-C67
UNC
6-32 x 4.76 mm
HDD3, HDD4
(black)
C26192-Y10-C75
TPM screw REM 3 x 15 mm
One way (black)
head
C26192-Y10-
(black) C176
M3x 3.5 / 0.25 Nm
2.5 HDD
(silver)
(on request
C26192-Y10-
only)
C102
slimline ODD M 2.0 x 2.5 /
in additional 0.2 Nm
5.25 inch
C26192-Y10-
bracket
C163
System fan C26361-K690-C3
27