Standard Psu; Replacing The Standard Psu; Required Tools; Preliminary Steps - Fujitsu PRIMERGY MX130 S2 Upgrade and maintenance manua Upgrade And Maintenance Manual

Power supply
6.1

Standard PSU

6.1.1

Replacing the standard PSU

Field Replaceable Units (FRU)
Average task duration: 10 minutes
6.1.1.1

Required tools

Preliminary and concluding steps: tool-less
●
Replacing the PSU:
●
– Phillips PH2 / (+) No. 2 screw driver
6.1.1.2

Preliminary steps

Before replacing the standard PSU, perform the following steps:
I
You are advised to perform this routine with the server in a horizontal
position.
Ê Disable BitLocker functionality as described in section
functionality" on page
Ê Follow all procedures described in section
70
59.
Upgrade and Maintenance Manual
"Disabling BitLocker
"Opening the server" on page 48.
MX130 S2